Slime & Epoxy Resin Experiment..

Share
Embed
  • Published on Dec 21, 2018
  • The first 500 people that sign up to Skillshare using my link below will get 2 months completely free! Check it out here: - skl.sh/zammeti
    #slime
    Thanks to Skillshare for sponsoring this video.
    skl.sh/zammeti
    🌎 Nick Zammeti/ Instagram
    instagram.com/nickzammeti
    🔨⚒ My Kit I use in my videos
    kit.com/nickzammeti
    ⚒ Makers Central 2019
    www.makerscentral.co.uk/HOME
    🎧 The Music I use in my video's
    share.epidemicsound.com/qdj62
    🌎 Nick Zammeti Personal Instagram
    instagram.com/zammeti
    🌎 My Website
    www.nickzammeti.co.uk
    🔨 Charlie The Maker (My Son's Channel)
    goo.gl/kSViJv
    💦 The Epoxy Art Resin I Use
    www.ebay.co.uk/usr/aktiniumltd
    www.resin4art.com/
    🌎 Come follow me on Twitter
    twitter.com/nickzammeti
    🌎 Check out my Facebook Page
    facebook.com/nickzammeti/
    …………………………………………………………………………………………………………………
    SEND ME STUFF
    NICK ZAMMETI
    PO Box 363
    ROMSEY
    SO51 1DY
    UNITED KINGDOM
    ………………………………………………………………………………………………………………………
    PLEASE NOTE: IF YOU ARE SENDING ME SOMETHING, PLEASE COULD YOU MARK A LOW VALUE ON THE PACKAGE YOU ARE SENDING. THANK YOU.
    ………………………………………………………………………………………………………………………
    🙊🙈🙉 NICK ZAMMETI DISCLAIMER
    Please note that my channel is for entertainment purposes only. You should NOT rely solely upon the information and techniques discussed and displayed in my channel.
    I'm not a professional woodworker or woodturner and working with machinery can be dangerous.
    It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
  • Howto & StyleHowto & Style

Comments • 1 297

  • Jay
    Jay 3 days ago

    Maybe letting the slime dry out before adding the resin will resolve the issue. It's worth a try.

  • Tia -
    Tia - 8 days ago

    I really like the finished one at the end. Maybe put a light under it like the matchstick lamp.

  • Fatima Munoz
    Fatima Munoz 16 days ago

    I swear he ever fails to make me laugh! Every single video I’m always smiling or laughing! I love you and your videos!!💙💙🤟🏻

  • the jams
    the jams 16 days ago

    I like his accent

  • Cheyenne Huskey
    Cheyenne Huskey 24 days ago

    The reason the more running slime didnt work out is because you need the putty slime(the purple) the other was water slime to much moisture im the mix

  • Brenda Register
    Brenda Register 25 days ago

    Love the purple on it is awesome but a great attempt on the others love it

  • Marc Kenner
    Marc Kenner 26 days ago

    I suspect the reason it won't work is because slime stays wet no matter what, so unless you can somehow totally enclose it in resin, it'll never set.

  • Salina McCain now Garber 11/17/2018

    It's cool I like it and koodos weird ones lol

  • hot rod phil
    hot rod phil 28 days ago

    30mn pour rien faire

  • Vivaciously Bree
    Vivaciously Bree 28 days ago

    Awesome video

  • XNDK Randoms
    XNDK Randoms Month ago

    Just an idea but have u thought of using the ball that didnt adhere to the slime as a base nad possibly add more resin possible in the fire colours and create an optical illusion sort of thing

  • Erica Norton
    Erica Norton Month ago

    Nick resin doesn't work well with water based anything. lol

  • Richard Smith
    Richard Smith Month ago

    Slime chages consistancy as the water leaves it. To make it slimy and less rubbery, just add a bit of water to the container you store it in.

  • Vladdamyre
    Vladdamyre Month ago

    the second type of slime worked better because it has less residual liquid in it. If you could of coated the outside of the molds with resin first you could of gotten the other slime to work, but damn physics

  • Allen Rothery
    Allen Rothery Month ago

    It doesn't have to be a failure! what about getting the slime out of the ball so it is hollow and then filling the void with colored acrylic? Or...turning an orb, hollowing it out (like a lidded bowl), filling the void with the slime, putting that orb into another mold and pouring more resin on, and around that one, and then turning that into another...something?

  • Allen Rothery
    Allen Rothery Month ago

    I was thinking that some of the silicon residue/skins would look funky-cool in an acrylic bowl. Love your work!

  • Ohe11itsODell
    Ohe11itsODell Month ago

    I lost count on the scarfs

  • Fallen Asleeep Studioz:0

    Hey buddy boi Nick!? Can I record the first part of the video and turn it to 2D trying sonething new?

  • Blue Thunder
    Blue Thunder Month ago

    For the one that the slime fell out the bottom, pour some different color resins in there, then when it dries cut a flat bottom on it and clean it up. Then when it’s sitting on a table it’ll look kinda like multi colored mountains in a ball

  • Wendy White
    Wendy White Month ago

    Cool video!

  • chris meth
    chris meth Month ago

    Cast some plastic army men of other types of plastic figurines and turn them down into a bowl or canister

  • Robert Ketter
    Robert Ketter Month ago

    Total fail

  • LD Lovett
    LD Lovett Month ago

    You are my brother's doppelganger. I'm completely fascinated, both by your projects and by watching you be him... Or something. :D

    • Nick Zammeti
      Nick Zammeti  Month ago +1

      hahaaha thats cool. thanks for watching x

  • Shaunna sparkles Clarke

    How about using plasticine

  • Joshua Cascante
    Joshua Cascante Month ago

    What if you freeze the slime first?

  • Bailey Bmx
    Bailey Bmx Month ago

    7:42 dude satisfied 427k peoole

  • Lain Powers
    Lain Powers Month ago

    What could work is if you freeze the slime before putting it in resin.

  • Myas_life
    Myas_life 2 months ago

    If you wanted it in the middle you could make a smaller mould and do that circle with the slime then do a bigger mould and cover the small circle with resin in the mould and wait for it to dry

  • Diana Erickson
    Diana Erickson 2 months ago

    What happens to slime by itself in your pressure cooker?

  • Long Haired Country Boy

    Nick, don’t give up on the slime balls. Put the slime in the clear plastic balls, then encase that in resin.

  • Elliott Fontaine
    Elliott Fontaine 2 months ago

    Editor: how many jump cuts you want?



    Him: Yes

  • Matt East
    Matt East 2 months ago

    Experimenting is half the fun to find out what works and what doesn't. But I'm a little surprised that you were surprised it didn't work. You're the master at resin casting and I'm only a viewer but I watched this just because I had a feeling it wouldn't work. It was entertaining anyway. Cheers mate!

  • aaron666 hendrickson
    aaron666 hendrickson 2 months ago

    You could try to wash the slime out and pour a different color resin in the cavity
    Ps the purple one looked like silly puddy

  • Julie Morris
    Julie Morris 2 months ago

    Try to make a hollow ball in the middle

  • Audrey Avila
    Audrey Avila 2 months ago

    I had a bad feeling because of the video with the little water balls. Cool idea but it's too wet for it.

  • David Stowell
    David Stowell 2 months ago

    Use the ball mold, fill it full of slime, freeze it so that it doesnt move, and then incase it in resin.

  • Dawakh
    Dawakh 2 months ago

    Nice scarf Nick

  • 11747 edam
    11747 edam 2 months ago

    Colin furze meets peter brown

  • galaxy girl
    galaxy girl 2 months ago

    I didn't know I wanted to know this but I'm glad I do now

  • Sarah Jett
    Sarah Jett 2 months ago

    A very pretty failure! Maybe try again sometime...

  • BTS clips
    BTS clips 2 months ago

    That's not good slime lol 😂👌

  • Laika GamePlays
    Laika GamePlays 2 months ago

    Looks neat! Can you make a blue one for me? :D

  • Tinalouise H
    Tinalouise H 2 months ago

    Sending subliminal messages with your scarves?!🤔 wink if you're being held & forced against your will to play with slime 😆

  • Joseph Prozinski
    Joseph Prozinski 2 months ago

    That slime is gonna dry out and shrink on the final piece with the opening. It's gonna end up not looking so cool. The slime is water based and I think that is what is causing the cloudiness. As the resin heats while curing, it is causing the water to evaporate out of the slime and create a cloud of super tiny water vapor bubbles in the curing resin.
    If you made two bowl shaped blanks from resin with cavities in them, then put the slime in between them it would work. Then glue them together with a final pour in another mold, making sure to get resin into the cavity to fill the space, I think you would get what you are looking for.

  • Morganne C.
    Morganne C. 2 months ago +2

    lol I like your color changing scarf

  • Steven Paige
    Steven Paige 2 months ago

    Shoulda tried adding more resin to it after it set. Making it a tad bigger. This would seal it.

  • Sunflowe r
    Sunflowe r 2 months ago

    Dis boi is really talented. But he knows actually NOTHING about slime. 😆

  • Allen Rothery
    Allen Rothery 2 months ago

    it looked to me as if the slime were more buoyant than the resin. I have an idea. If you used the a turner inside of the pressure pot (if you needed to use it), then would make sense that the resin would have time to form a layer that would keep the slime in the middle-ish. Another way you may be able to use it: pour a round mold (like the Christmas balls) and put a orb inside (like one of those vending machine capsules used for irregular toys) cure it. put it on the lathe and part it about 1/4 of the way down. remove the capsule. put the slime in the cavity. cap it with the parted piece and apply the resin to seal the edges and fill the remaining void. It should be able to cure centered-up and workable. I think.
    Of...use a one-off of the melted wax method. Make a use a mid-melt chocolate shaped like a lollypop to create a removable void in the resin as it sets. Once set, gently heat the blank until the chocolate melts and runs out of the sprue hole. inject the slime in the void and top-off with more resin until that cures. Badda-bing, badda boom.
    maybe.

  • Gacha Theo
    Gacha Theo 2 months ago

    You kinda remind me of ameliaas father...

  • .
    . 2 months ago

    May I ask where you bought your slime?.

  • ThePurpleRose OfTexas
    ThePurpleRose OfTexas 2 months ago

    I love to watch all of your crafty try’s and see how they play out. I have a suggestion for the slime. What if you make a 2 semi circles of resin with the middle hollowed out. Like a bowl, (take the ornament and find a smaller circle one to put inside it. Pour the resin and let both halves cure. Making a empty sphere within a sphere, once you put the halves together. Then put a smaller amount of the slime inside the smaller hollowed out sphere. Add more resin to fill the rest of the smaller sphere. Glue the halves together with more resin. By putting in a little resin then the slime then more resin on top. Or making a small straw like hole through the entire piece. That can serve as a funnel to get the resin into the center or core of the piece. Then let the whole thing cure. I think that would actually work. Even if the center never really “sets”. The slime would have the thick wall of the outer sphere to contain it. That way you could finish the piece on the lathe without getting to the slime and ruining the piece. So basically a sphere within a sphere. With the smaller inner sphere encapsulating the slime.
    Interested to see if you attempt my idea. Regardless, love watching all you do! You are a very talented artist and creator. I enjoy watching your videos! Thanks for sharing! 💜 from down Texas way!

  • haley farrell
    haley farrell 2 months ago +2

    Anyone else notice he changed scarves in the middle of a sentence at 1:42 lol

  • david obrien
    david obrien 2 months ago +1

    Maybe it would have worked with 2 half’s spheres of resin with a dip in the middle and put the slime in the center and then seal the two half’s

    • ThePurpleRose OfTexas
      ThePurpleRose OfTexas 2 months ago +1

      david obrien Lol. That was exactly my thoughts! A smaller sphere within a bigger sphere. With the slime in the center of the smaller one. Like two bowls together and the slime in the center! Funny.... great minds....

  • Taylor Uhlman
    Taylor Uhlman 2 months ago

    You are a delightful man and I love these videos but he fact that slime is immune to resin freaks me out

  • Andy Anderson
    Andy Anderson 2 months ago

    On the plus side, even if ya mess one up, can just pull the slime out and makr another.

  • kayleighlasorm
    kayleighlasorm 2 months ago

    I don't understand why he thought it would work. I mean isn't it obvious one would sink below the other or that the resin would just sit on top where he poured it? Or does this strategy work with other material? Just wondering :)

  • Night_Blue_Wolf
    Night_Blue_Wolf 2 months ago +1

    7:35 PEEL PORN!!!

  • ryan21terry
    ryan21terry 2 months ago

    try coating the slime in res first before casting the u have a solid surface to deal with

  • Loreen Viñas
    Loreen Viñas 2 months ago

    I think that's putty

  • Kimberly Alejandrez
    Kimberly Alejandrez 2 months ago

    You should buy something hunted and pu it in resin

  • White Wing
    White Wing 2 months ago

    Pretty cool.

  • Beamme Jay
    Beamme Jay 2 months ago +1

    Love how his scarf keeps changing between the shots, lol

  • Ruby Blade
    Ruby Blade 2 months ago

    Gallery slime takes at least a few months to dry out enuf to harden it would probably work better them and it will still have the same colors but it will also shrink by at least half

  • kat 0.o
    kat 0.o 2 months ago

    The first one that you used was a water based slime

  • kat 0.o
    kat 0.o 2 months ago

    Oof, the peel porn😂

  • Ducksieboi Boi number wan

    My eyes had an orgas early on the video... That Was FUNKY

  • HannahKAS
    HannahKAS 2 months ago

    Lol ure slime is sooo o reactivated make it at home

  • Savysmarty
    Savysmarty 2 months ago +3

    What if I don’t like slime.....
    😢sadness

  • federico stefanini
    federico stefanini 2 months ago

    That slime will be preserved for er u like the idea of a time capsule... Was not a bad project tho could you put a bubble and put some in it?

  • ok bye
    ok bye 2 months ago

    9:17

  • stuff, stuff and more stuff Oof

    I was about to ask what kind of resin you use but when I looked at the title I answered my own question :P

  • Emma Ross
    Emma Ross 2 months ago

    You could also try with homemade slime! If you use the right recipe, it will be relatively dry, and I think it would work with the resin better

  • Gab kh
    Gab kh 2 months ago

    Ur


    Mom gay

  • Nicole zoo
    Nicole zoo 2 months ago

    peeling the dry glue is like peel porn

  • Duckcake 7
    Duckcake 7 2 months ago

    His channel name should be


    I like Rezin too much

  • Shiloe Moritrebor
    Shiloe Moritrebor 2 months ago

    Cotton candy 💁🏻‍♀️😂

  • michael passineau
    michael passineau 2 months ago

    I didn’t read any previous comments but I was wondering if anyone else thinks this look like a butthole?

  • Dorky Bez
    Dorky Bez 2 months ago

    The reason why the other slime didn’t work is because it was water based so it takes months for it to fully harden in a glob. If you want something to work like that use a pva slime. (Based with glue). The one that kinda turned out I’m guessing was a putty, not slime. It has different ingredients and therefore a different texture. So yeah try using an online seller who uses pva glue based slime! 💜

  • Jacob Clark
    Jacob Clark 2 months ago

    Plot twist him and his daughter had a bet and she lost so he humiliated her on USclip.

  • DA BEAST DA BEST
    DA BEAST DA BEST 2 months ago

    lol try making slime with epoxy that is what I would call an experiment

  • Jimena Nava
    Jimena Nava 2 months ago +1

    One is puty and on other is slime

  • Charleigh TePeeti
    Charleigh TePeeti 2 months ago

    I love how you keep calling slime weird LOL

  • Autumn Young
    Autumn Young 2 months ago

    It kinda looks like a funky crystal ball

  • Nicole
    Nicole 2 months ago +1

    Maybe get a smaller ball and put slime and resin then dry it then get a bigger ball and surround it with more resin?

  • Wem Todd
    Wem Todd 2 months ago

    If you want to do this again, you could always make one sphere and coat it in a bigger ball? Because then it has a safety shell?

  • Austin Webber
    Austin Webber 2 months ago

    We figured out what kirby is made of

  • Sparta Dela Vega
    Sparta Dela Vega 2 months ago

    Mold 2 half resin in ball mold let it set, then place slime in and then glue them together I guess

  • ҡα૨lεყ :3
    ҡα૨lεყ :3 2 months ago

    You should test all the different textures of putties to see which of them work. I don't know, it sounds fun.

  • lego puzzlemaniac
    lego puzzlemaniac 2 months ago

    Is it highly viscous?

  • Tiffany Bumgarner
    Tiffany Bumgarner 2 months ago

    I love when he pulls the dried stuff off the containers. I use to do that with my dad's leftover paint when It would dry up.

  • Josslyn Murphy
    Josslyn Murphy 2 months ago

    Giggaly slime stif slime

  • tango robotics
    tango robotics 2 months ago

    That galaxy slime is a slime I have.
    And holy hell is it weird. The only thing I did with it is slap it and say "why are you so slimey and odd Mr.slime"

  • Nekoszowa
    Nekoszowa 2 months ago

    I think I know who was inspiration for Smite's Merlin design...

  • Josiah Hairston
    Josiah Hairston 2 months ago

    1:43 he changed scarfs

  • Mad9977 Productions
    Mad9977 Productions 2 months ago

    "it's a very different animal" 😂

  • Courtney Pinkham
    Courtney Pinkham 2 months ago +1

    Can he encapsulate me in his body’s resin...?? 🤔🤔🤔 I’m down for all of that!!!

    • Courtney Hayes
      Courtney Hayes 2 months ago

      Bahaha he has a special kind just for YOU!

  • Tina Tuttle
    Tina Tuttle 2 months ago

    Looks like intestines going back into the body lol

  • Heather
    Heather 2 months ago

    Try silly putty.

  • Gigaboom _
    Gigaboom _ 2 months ago +4

    If you make it multicolor won't the colors start to mix if you play with it?

  • titch_can_i_nail_it
    titch_can_i_nail_it 2 months ago

    looks like a tidlewave 🌊